Actually, it was a little scary to think about when I pulled the front clip off the mako. All that holds the front clip on are 4 small 1/4 inch bolts that connect to a cross-bar which the hood pivots on. The two on the passengers side came out with no problem............. but the hex heads were stripped out on the drivers side. When I drilled the heads, I noticed they drilled rather easily............. then I realized that these two were brass bolts -- soft brass 1/4 inch bolts ! No problems for 30 some years.......... so I guess the bracket they go thru adds alot of strength !!!
These are just some pix of the front end: with.......... and without the front clip installed. More pix and updates later ! Rick




